Pumps Make Antico
We are a leading Authorized Wholesale Dealer of centrifugal chemical process pump -ns series, magnetic drive pumps in pfa/pvdf/cfrpvdf, hazardous chemical transfer pump, acid transfer pumps, etp self priming pump and chemical process pumps-nz series from New Delhi, India.Centrifugal Chemical Process Pump -NS Series
Approx. Rs 26,000 / OnwardsGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Onwards |
| Motor Horsepower | 5 HP |
| Usage/Application | Industrial |
| Stages | Single Stage |
| Motor Phase | Three Phase |
| Pump Type | Centrifugal |
| Model Number | NSRP |
| Capacity (Meter Cube/Hour) | 30 |
| Flow Rate (Meter Cube/Hour) | 30 |
| Frequency (Hertz) | 50 |
| Warranty | 18 months |
| Type of end use | Resale |
| Power Source | Electric |
| Cooling Method | Water Cooled |
| Fuel Type | Electricity |
| Maximum Head | 30 |
| Motor Speed | 144,AND,2800 |
| Design Type | Centrifugal |
| Motor Power (Horse Power) | 1,TO,5 |
| Automation Grade | Semi-Automatic |
| Motor Phase Type | 3,PHASE |
| Motor Power Horse Power | 5 HP |
| I Deal In | New Only |
| Installation & After Sales Service | Yes |
| Bearings | Rolling Element Bearings |
| Lubrication | Grease / Oil |
| Shaft Seal | Single Mechanical Seals & Gland Packing |
Centrifugal Pump -NS Series are injection moulded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction horizontal centrifugal pumps.
NS Series pumps are specifically designed to pump low specific gravity chemicals; best suited for finishing, electroplating, filtration, scrubbing, transfer and generic chemical applications
|
|
Data Sheet -I |
Data Sheet-II |
Data Sheet- III |
|
Pump Make |
Antico |
Antico |
Antico |
|
MOC |
GFRPP |
GFRPP |
GFRPP |
|
Discharge Capacity |
10m3/hr |
10m3/hr |
15m3/hr |
|
Head |
7M |
12M |
20M |
|
Suction Size |
50MM |
50MM |
50MM |
|
Discharge Size |
40MM |
40MM |
40MM |
|
Recommended Motor |
1HP/1440RPM |
2HP/2900RPM |
3HP/2900RPM |
|
Unit Pump Price |
Rs.26,000 |
Rs.26,000 |
Rs.26,000 |
|
Motor Price |
Not quoted |
Not quoted |
Not quoted |
|
Tax |
Extra as applicable |
Extra as Applicable |
Extra as applicable |
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: DELHI
- Delivery Time: STOCK
Magnetic Drive Pumps in PFA/PVDF/CFRPVDF
Approx. Rs 1 Lakh / OnwardsGet Latest Price
Product Details:| Brand | ANTICO |
| Material | PFA/PVDF/CFRPVDF |
| Max Flow Rate | 90 m3/hr |
| Head | 60 m |
| Phase | 3 |
| Warranty | 1 YEAR |
| Condition | New |
Product Description MJ Series pumps are fluoropolymer lined, magnetic drive, horizontal, single stage, volute casing, center line discharge, end suction, sealless centrifugal pumps with rotary shaft design to surpass performance expectations in the most demanding chemical applications and environments. Dimensional and design criteria of MJ pumps conform to ISO 2858 / ISO 5199 / EN 22858
Additional Information:
- Item Code: MJ
- Port of Dispatch: Delhi
Hazardous Chemical Transfer Pump
Approx. Rs 85,000 / UnitGet Latest Price
Product Details:| Minimum Order Quantity | 1 Unit |
| Model Name/Number | NJK |
| Head | 100 |
| Capacity | 200 |
| Temperature | 110 |
| Design Type | Armour |
| Motor Power | 75 HP |
| I Deal In | New Only |
| Viscosity | 150 mPas (cP) |
| Suction Lift | 8 m |
| Bearings | Rolling Element Bearings |
| Lubrication | Oil |
| Maximum Working Pressure | 16 Bar |
| Shaft Seal | Single (TB/RA) & Double (DROTT) Mechanical Seals |
NJK Series pumps are injection moulded, horizontal, back pull-out, volute casing type, single stage, center line discharge,end-suction centrifugal pumps. Cast iron armours with the injection moulded wetted parts are designed to handle higher hydraulic pressures and flange loads. NJK pumps are excellent alternates to expensive super alloy pumps for hazardous, corrosive and toxic media. Dimensional and design criteria of NJK pumps conform to ISO 2858 / ISO 5199 / EN 22858.
Additional Information:
- Item Code: NJK
- Delivery Time: 2-4 WEEKS
Acid Transfer Pumps
Approx. Rs 40,000 / OnwardsGet Latest Price
Product Details:| Capacity | 40 |
| Automation Grade | Automatic |
| I Deal In | New Only |
Pumps are used to circulate and transfer Acid of all concentrations from one piece of equipment to another.
ETP Self Priming Pump
Approx. Rs 42,500 / OnwardsGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Onwards |
| Pump Type | Centrifugal Pump |
| Motor Horsepower | 3 HP, 5 HP |
| Discharge Pressure | 35000 |
| Max Flow Rate | 35 M3 |
| Type of end use | Industrial |
| Maximum Discharge Flow | 35000 |
| Capacity | 35M3 |
| Application | ETP |
| Motor Phase | Three Phase |
| Maximum Head | 20 mtr |
| Maximum Suction Lift | 3 mtr |
| Maximum Liquid Temperature | 80 |
| Usage/Application | Effluent Treatment Plant |
| Material | PP |
| Brand | Antico |
| Shaft Sleeve Dia | 35 mm |
| Mechanical Seal | 35 mm |
We are among the leading suppliers of a wide variety of Self Priming Process Pumps. Our vendors use premium grade raw material to manufacture these pumps. Our offered pumps are well-known for their high performance, sturdy construction and long service life. All these pumps are quality tested on various quality parameters to ensure that only superior quality products are delivered to our clients. In addition, these pumps are available at market leading prices.
Features:
- Normal centrifugal pump with a priming bowl and a built-in rubber flap valve
- Suction lift of 3 m
- Offered in completely injection molded polypropylene
Additional Information:
- Item Code: ETP50
- Port of Dispatch: DELHI
Chemical Process Pumps-NZ Series
Approx. Rs 30,000 / UnitGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Unit |
| Stages | Single Stage |
| Max Flow Rate | 50M3 |
| Head | 50 mtr |
| Brand | Antico |
| Material | GFRPP/PP/PVDF |
| Motor Horsepower | 3 HP,10 HP, 2 HP, 5 HP |
| Head (Meter) | 15 |
| Motor Phase | Three Phase |
| Phase | 3 PHASE |
| Flow Rate (Meter Cube/Hour) | 40 |
| Capacity | 50M3 |
| Frequency | 50 Hz |
| Temperature | 220 |
| Power Source | Electric |
| Warranty (Month) | 12 MONTHS |
| Material of Construction | PP / GFPP / PVDF / ETFE |
| Motor Speed (RPM) | 1400/2800 |
| Warranty | 1 YEAR |
| Cooling Type | WATER |
| Maximum Head | 38 |
| Design Type | CENTRIFUGAL |
| Maximum Discharge Flow | 50000 |
| Motor Power | 15 |
| Motor Phase Type | 3 PHASE |
| Pressure Bar | 10 |
| Pump Type | Centrifugal Pump |
| Condition | New |
| I Deal In | New Only |
| Type of end use | Resale, Sewage, Industrial |
| Installation & After Sales Service | Yes |
| Bearing | Rolling Element |
Chemical Process Pump
NZ Series long-coupled thermoplastic mechanical seal process pump provides the most economical, combinatorial design which simplifies maintenance, reduces inventory, is able to give a near constant head for a wide flow range.NZ pumps are injection moulded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction centrifugal pumps. NZ Series pumps are specifically designed to provide optimum pumping solutions with reduced life cycle cost for all chemical applications.
Sturdy, Power Saving, Efficient Mechanical seal pumps for mild to aggressive chemicals.
- Head : upto 50 meters
- Flow : upto 50 m3/hr
- Materials: GFR-PP, PP, PVDF
- Power source: Electric
- Use of pump: Chemical Transfer, Loading Unloading
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Delivery Time: 3-4 WEEKS
Thermoplastic Pumps
Approx. Rs 50,000 / OnwardsGet Latest Price
Product Details:| Max Flow Rate | 40 m3/hr |
| Head | 38 m |
| Usage/Application | Chemical Process, Food and Beverage Processing, Steel Production, Water Supply and Cooling Water, Wa |
| Maximum Temperature | PP: 82 DegreeC (180 DegreeF), GFRPP: 90 DegreeC (194 DegreeF), PVDF: 104 DegreeC (220 DegreeF) |
| Maximum Working Pressure | 10 bar (145 psi) |
| Suction Lift upto | 8 m (26 ft) with priming chamber |
| Viscosity upto | 150 mPas (cP) |
| Maximum Specific Gravity [SG] | 1.8 - 3.0 |
| Lubrication | Grease / Oil |
Thermoplastic Pumps are injection molded, horizontal, side discharge, back pull-out, volute casing type, single stage, end suction centrifugal pumps. NZ Series pumps are specifically designed to provide optimum pumping solutions with reduced life cycle cost for all chemical applications.
Self Priming Pump
Approx. Rs 45,000 / OnwardsGet Latest Price
Product Details:| Motor Horsepower | 5.5 kW (7.5 hp) |
| Capacity | 35 m3/hr |
| Head Size | 15 m |
| Maximum Suction Lift | 8 m (26 ft) with priming chamber* |
| Maximum Liquid Temperature | PP: 82 DegreeC (180 DegreeF) |
| Viscosity upto | 150 mPas (cP) |
| Maximum Working Pressure | 10 bar (145 psi) |
| Lubrication | Oil |
| Maximum Specific Gravity [SG] | 1.8 - 3.0 |
ETP Self Priming Pump are Injection Molded Polypropylene Self Priming Pumps best suited for pumping effluent in chemical process industry.
Vertical Glandless Pumps
Approx. Rs 19,500 / OnwardsGet Latest Price
Product BrochureProduct Details:| Model Name/Number | VGP,VGP-160 |
| Motor Horsepower | 1 to 7.5 |
| Model | VGP-160 |
| Brand | ANTICO |
| Head | 20 |
| Max Flow Rate | 35M3 |
| Condition | New |
| Body Material | PP |
| Cooling Method | Water Cooled |
| Power Source | Electric |
| Motor Speed | 2900 RPM |
| Finishing | Paint Coated |
| Fuel Type | Electricity |
| Motor Phase | Three Phase |
| Temperatures | 80 |
| Motor Speed (RPM) | 2900 |
| Warranty | 1 YEAR |
| Material | PP |
With rich industry experience, we are supplying a wide array of Vertical Glandless Pumps. These pumps are manufactured by our reliable vendors using premium quality raw material with all the leading quality standards and norms. The offered range of pumps is highly acclaimed due to its optimum quality, reliable performance and longer service life without any hassles. Further, these pumps are offered in various specifications. Clients can avail these pumps as per their specific requirements at industry leading prices.
Specifications:
| Model | Suction (mm) | Delivery (mm) | Impeller Dia (mm) | HP | RPM |
| VGP 10 | 25 | 25 | 100 | 1 | 2900 |
| VGP 12 | 36 | 32 | 120 | 2 | 2900 |
| VGP 13 | 36 | 32 | 150 | 3 | 2900 |
| VPG 160 | 75 | 40 | 157 | 7.5 | 2900 |
Additional Information:
- Item Code: VGP-SERIES
- Port of Dispatch: DELHI
Effluent Treatment Pump
Approx. Rs 50,000 / OnwardsGet Latest Price
Product Details:| Minimum Order Quantity | 1 Onwards |
| Brand | Antico |
| Head | 20 |
| Max Flow Rate | 40 m3/hr |
| Model Name/Number | ETP-50 |
| Material | PP |
| Speed | 2900 RPM |
| Temperature | 80 Degree |
| Country of Origin | Made in India |
Effluent pumps are typically used to pump grey-water from a septic tank to a leach field. For raw sewage, a sewage pump or grinder pump is recommended to prevent clogging from handling solids
Explore More Products
Soltech Pumps & Equipment Private Limited
New Delhi - 110092, Delhi, India
© Soltech Pumps & Equipment Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited